Industry updates, technical guides, compressor troubleshooting, and practical content for refrigeration professionals.
216 published articles
When a Copeland scroll compressor starts and stops too frequently or trips protection devices, the root cause is often outside the compressor itself: control settings, charge instability, airflow issues, phase problems or wrong capacity balance in the system.
Read Article
Many Copeland scroll compressors lose efficiency or reliability because superheat, return gas cooling, oil return and airflow are only checked roughly. A structured field checklist helps installers optimize performance without stressing the compressor.
Read Article
A new cold room compressor should not be started blindly. Refrigerant selection, oil type, wiring, crankcase heating, superheat and control settings all need verification before the first stable run.
Read Article
After a compressor burnout, replacing the compressor alone is not enough. Acid, carbon residue, degraded oil and moisture can quickly destroy the replacement if cleanup is incomplete.
Read Article
When a replacement scroll compressor fails too soon, the problem is usually procedural: wrong model selection, poor cleanup, bad evacuation, incorrect startup practice or controls left out of range.
Read Article
Liquid floodback, low superheat, poor oil return, voltage issues and repeated short cycling are among the most common reasons a scroll compressor fails, including many Copeland scroll units in the field.
Read Article
Many compressor failures do not happen suddenly. Noise, overheating, unstable temperatures, oil issues, and repeated cycling often appear earlier and should not be ignored.
Read Article
HVAC is no longer just a technical utility. It shapes comfort, energy efficiency, food preservation, business continuity, and the overall reliability of modern buildings.
Read Article
Daikin has recently started construction of the new factory in Poland. This new plant will start producing heat pumps in July 2024 and the total investment will be 300 million euros.
Read Article
The Global Container Refrigeration facility of Carrier Transicold in Singapore, a key manufacturing site for Carrier's refrigerated container systems globally, is embracing Industry 5.0, which refers to people working together with intelligent robots and machines for more personalized, sustainable and resilient operations.
Read Article
Eurovent, together with 11 major European associations and global partners active on the European market, is calling on the European Parliament's Environment Committee to reject amendments banning F-Gases, jeopardizing the EU's climate and energy security goals.
Read Article
On Wednesday, March 1st, the ENVI Commission in Brussels put to the vote and approved important choices regarding the text that will govern the use of F-Gas (fluorinated gasses).
Read Article